VIPER PRO CROSS EVO 2023
|Prezzo online:||2,049.00€ 1,849.00€|
INFO VIPER PRO CROSS EVO 2023
AYRTON VIPER PRO CROSS 3.0 MODEL 2023
ENGINE: GPX ZONGHSHEN 155 cc OIL FILTER 3.0 version 2023 X10 (LATEST EVOLUTIONARY SERIES), 4-stroke, 2-valve with oil cooling via oversized lamellar radiator.
Internal Oil Filter, direct access to the clutch, oil level sight glass
Bore and Stroke 60x55 Compression Ratio 9,6: 1
Power declared by the parent company 16Cv / 9.500 rpm
4-speed manual transmission (N1234)
Engine starting with gear engaged.
Clutch In oil bath with 6 reinforced discs with access from the external casing
THE ZS 155 ENGINE installed is THE LATEST EVOLUTIONARY SERIES.
Oversized high dissipative efficiency lamellar RADIATOR equipped with high pressure aeronautical braided hoses for oil passage.
ELECTRONIC IGNITION: "medium" lightweight 4-pole external ROTOR advanced model 2020 DAYTONA type with large electronic control unit
MIKUNI MOLKT VM 26 CARBURETOR, 3nd generation
REEL RACE performance
RAPID GAS in anodized aluminum. TOP quality
EXHAUST MANIFOLD in AISI 304 STAINLESS STEEL (STAINLESS STEEL) with tig welding without material coating. Heat shield also in AISI 304 STAINLESS STEEL
"AYRTEK RACING" EXHAUST SILENCER in AISI 304 STAINLESS STEEL (STAINLESS STEEL) with tig welding without material coating. Body in AISI 304 stainless steel with a pentagonal structure with sandblasted steel finish to obtain a "TITANIUM LOOK" visual effect.
BOTTOM end anchored with stainless steel rivets.
Removable DB-killer that can be assembled / disassembled in 1 minute by means of a locking pin Stainless steel anchor strap covered in rubber to ensure high resistance to vibrations and mechanical stress.
EVOLUTION 2023 FRAME with brand new structure, in high-strength chromium molybdenum steel, of the perimeter supporting frame with round tubes and with laser-cut frame cradle and frame "legs" structures, therefore these structures are lighter, more rigid and above all very precise as they are laser cut, it also features new CNC aluminum platform supports.
FRAME decomposable seat post in chromium molybdenum steel
7020 ALUMINUM REAR SWINGARM WITH SUPERLIGHT BOX reinforced and stiffened with hard oxidation treatment, long version EXTENDED EVO.
STEERING PLATES in 7075 T6 aluminum CNC machined, completely machined from solid with 4 attachment pins for each fork. Extremely high structural rigidity and lightness thanks to CNC machining.
CNC machined 7075 T6 aluminum 28mm handlebar RISER.
DNM K4 PRO-SHOCK EVOLUTION FORKS (improved smoothness) hydraulic Upside-down stems with fully adjustable barrels both in compression and in extension. measures 730mm. STEM DIAMETER 37mm TOP OF THE RANGE. Fully adjustable. This fork with 37mm stem diameter compared to all other forks with 33mm stem and has an excellent basic calibration specific for pit bikes which makes it, thanks to its multi-adjustments, very performing for racing use. At the moment it is the best product on the market in terms of value for money.
Rear SINGLE SHOCK DNM HORNET RACE EVOLUTION4 2023 (TOP OF THE RANGE) with 4 ADJUSTMENTS fully adjustable at both high and low speeds in rebound, compression and preload, 348mm, choice of spring (800/1000/1200 lbs depending on destination d use and based on the rider's weight and driving style. DNM HORNET RACE 2023 version Advanced and improved. TOP OF THE RANGE in its category.
2023 Z-BRAKE FRONT BRAKE SYSTEM (CRF450 REPLICA) with oversized brake pump and double piston brake caliper with double 3-HOLE disc.
DOUBLE BRAKE DISC 220mm front daisy chain self-centering super light with 3 HOLES
REPLICA CRF450 rear BRAKE SYSTEM with single oversized piston
Super-light 3-hole 190mm self-centering petal rear BRAKE DISC
PROTAPER handlebar 28mm with variable section in very high quality aluminum without crossbar.
AYRTON STYLE PLASTICS with graphic design made in Italy.
CROWN in steel with minimalist design to reduce suspended masses
KMC RACE CHAIN high resistance 420 pitch
BRAKE PEDAL laser cut.
RAISED FOOTPEG SUPPORTS in CNC aluminum
DETAILS AND FINISHES
“PERFORMANCE STYLE” LEVERS with anodized finishes
High quality, anti-tear / anti-slip high density SADDLE. EVO model. TOP OF THE RANGE
SHIFT LEVER with folding end
HIGH QUALITY SCREWS 8.8 and 10.9 at the points of greatest stress.
CROSS VERSION RIMS AND TIRES: • 14 "front and 12" rear spoked aluminum rims with reinforced 7075 T6 aluminum rim and reinforced spokes. • TIRES: KENDA "MILVILLE" OR WSK - HJ SUPERCROSS, 80/100 14 "front and 100/80 12"
Scheda Techinca: VCPADN
VIPER PRO CROSS EVO 2023